Inside a microwave oven is a magnetron it helps generate microwaves by emitting electrons? mmm as Ed would say where are these electrons? We know a microwave works but are we misunderstanding how it really works maybe Ed would think so.

"Protons and Electrons --- Are you sure they are not the north and south
pole individual magnets?"

"The invention of an electron came by a tricky method in using
electricity in a vacuum tube. Normally whether it be a generator or a
battery, the positive terminal will have to be connected to the
negative terminal, but in the vacuum tube two batteries with different
strength were used, the smaller battery was connected normally, but the
larger battery's negative terminal was connected to the smaller
battery's negative terminal, and the positive terminal was left
alone. That connection gave the negative terminal a double dose of
strength, and so it became hotter and could push more. It was called
cathode and the positive terminal anode. And the electricity that
passed from the cathode to the anode was called electrons."

"The radio waves are made by the North and South pole

Stones Cast not Cut?

As always the search for clues continues.. how did Ed Leedskalnin  quarry and place his stone blocks at rock gate? (coral castle) . He believed it was possible to create a machine that generated perpetual motion and power. He has also written about understanding how acid works to dissolve matter. 

Joseph Davidovits a French materials scientist holds a theory that some of the blocks in egypt where not cut but created "cast" onsite. Have a look at this site to read more

Davidovits: “The results [of the quarry samples] were compared with pyramid casing stones of Cheops, Teti and Sneferu. The quarry samples are pure limestone consisting of 96-99% Calcite, 0.5-2.5% Quartz, and very small amount of dolomite, gypsum and iron-alumino-silicate. On the other hand the Cheops and Teti casing stones are limestone consisting of: calcite 85-90% and a high amount of special minerals such as Opal CT, hydroxy-apatite, a silico-aluminate, which are not found in the quarries. The pyramid casing stones are light in density and contain numerous trapped air bubbles, unlike the quarry samples which are uniformly dense. If the casing stones were natural limestone, quarries different from those traditionally associated with the pyramid sites must be found, but where? X-Ray diffraction of a red casing stone coating is the first proof to demonstrate the fact that a complicated man-made geopolymeric system was produced in Egypt 4,700 years ago.”"Davidovits has used chemical analysis to show that the stones of the pyramids are different from the native stone in the quarries"

Davidovits argues that when Imhotep is credited as “the inventor of the art of constructing with cut stones”, it is actually a mistranslation of the Greek “xeston lithon”, which does not translate as “cut stone”, but rather means “the action to polish stone”. For Davidovits, Imhotep is actually the inventor of working with agglomerates, or geopolymers.)

Machining Stones in Egypt

I have been still thinking about the stone markings at rock gate and in ancient cities around the world. Here is an interesting video courtesy of the History channel. Have at look at the video from 3:12, the researcher finds a deep cut in one of the stones. He is convinced a large machine was used to cut the stone.

Clues between Inca walls and Rock Gate

So reading through one of Ed Leedskalnins  documents he says " ACID:  What is acid and what gives acid the ability to take the other matter in parts? For instance Zinc, acid and the bubbles that are coming out of the Zinc are held together themselves by the same kind of North and South pole magnets, and why acid which is one kind of matter can take another kind of matter in parts. The acid atoms must have a smaller orbit and few magnets in it than the other matter it takes in parts. In that case the acid atoms can get closer, and in the other matter atom’s orbit, and peel off one magnet after another until the bigger atom matter is gone." 

This had me thinking so I researched a little and discovered..

"A detail from one of the walls of the Sacsayhuaman complex. Many stones show strange impressions or scrape marks, as if the surface has been soft during tooling." by Professor Davidovits from the Geopolymer Institute in France.

Now if you read one of my earlier posts I questioned similar markings on the walls at Rock Gate.

magnetic current ? acid ? what do you think?